“A suitable solution for ground and tunnel projects”

Equipment is not transported due to on-site manufacturing.

• Easy and fast installation.
• No need for additional special tools.
• No torque requirement.
• • 2009 International Building Code (IBC) , 2009 International Residential Code (IRC) ,State Departments of TransportationTS500, TS 708, ISO 15832


“Easy, fast installation, no torque required”

Regbar high-strength reinforcement threading machines enable flawless thread cutting in every quality of rebar detailed in below table. Mobile Regbar equipment enable on-site processing without the need to carry equipment. Thus, both the cost and time loss resulting from transportation of equipment is prevented and work is followed much better.

The injection is applied in the length out of active area. The anchorage bars are fixed to the facade lining. In some situations, the pre-stress is applied to the bars. While the anchorage bars drop by the tensile strength, it is met with frictions around the anchorage bars. To sum up, it is the process of mounting or fixing a block to a more durable and stable place behind it. It is the process of fixing the unstable soil to a more durable part behind it (sometimes to the durable soil behind it, sometimes to the available soil by trusting only the friction of the anchorage or to the reinforced concrete pile which is piled / poured on the back side before) in order to prevent the potential landslide. Regbar presents optimum solutions by carrying out the demanded anchorage threading in-place with the high technological mobile equipment sent to your site with no extra rebar logistic cost.